The E51 is the most compact instrument in the range, offering basic control in heating and cooling applications. This unit also includes an off cycle defrost function.

• -50 to +99 deg c range
• NTC or PTC input
• 1 x 16 amp output relay
• 230 volt, 115 and 12 volt supply
• 65 mm x 33 mm panel size

The TLZ11 is a fully programmable thermistor or pt1000 input device suitable for heating and cooling across a wide temperature range.

• -100 to +500 deg c range
• NTC, PTC, high temperature NTC and PT100 input
• Up to 2 outputs, 1 x 16 amp, 1 x 8 amp
• Digital input
• Programming key

  Universal Key for Fast Instrument Programming

  Most of the instruments in the Tecnologic range have the ability to accept the programming key via a 5 pin plug in the instrument housing. This allows very fast and completely repeatable programming at the touch of a button.

  The key has its own power supply so it can be used to power up an instrument straight from the box via its 5 pin connection. Alternatively the key will work without its power supply if the instrument is wired in situ to its supply.

  The Key has a series of dip switches located under a removable cover, these can be set in various different combinations. When the key is inserted into the instrument these combinations dictate if it will up load or down load a set of parameters to and from the instrument when the key’s button is pressed.

  The key is also used as a portal via its usb connection when working with the Tecnologic configuration software tools.

• UL approved

The Z31 range is dual purpose thermostat covering heating as well as refrigeration applications.

Across two models (1 probe, 1 output version Z31, 2 probe, 2 output version Z31Y) many different control and alarm features are selectable making this a very powerful and flexible thermostat.

This range also includes the option of our Patented sensitive touch keyboard .

• -50 to +150 deg c range
• NTC or PTC input
• Up to 2 relay outputs, 1 x 16 amp, 1 x 5 amp
• Electronic defrost function
• Digital input
• Switched mode power supply, 100-240 v, 12-24 v
• Programming key

  Universal Key for Fast Instrument Programming

  Most of the instruments in the Tecnologic range have the ability to accept the programming key via a 5 pin plug in the instrument housing. This allows very fast and completely repeatable programming at the touch of a button.

  The key has its own power supply so it can be used to power up an instrument straight from the box via its 5 pin connection. Alternatively the key will work without its power supply if the instrument is wired in situ to its supply.

  The Key has a series of dip switches located under a removable cover, these can be set in various different combinations. When the key is inserted into the instrument these combinations dictate if it will up load or down load a set of parameters to and from the instrument when the key’s button is pressed.

  The key is also used as a portal via its usb connection when working with the Tecnologic configuration software tools.

• Patented sensitive touch keyboard

  Sensitive Touch Technology

  We now have a selection of instruments that are available with a sensitive touch keyboard option.

  The Patented sensitive touch option has no tactile buttons and works with the lightest of finger touch which is acknowledged with a positive beep of its built in buzzer.

  The easily cleaned smooth front surface free of mechanical raised buttons guarantees the maximum level of impermeability against liquids and the minimum build up of surface contaminants.

  In addition to its practical benefits the new sleek design enhances the appearance of our instruments making them stand apart from standard units in the range.

• UL approved

Din rail mounted digital thermostat for use in panels for control or as an alarm module.

• -50 to +150 deg c range
• NTC or PTC input
• Up to 2 relay outputs, 1 x 16 amp, 1 x 8 amp
• Switch mode power supply, 100-240 v, 24 vac/dc, 12 vac/dc
• Programming key

  Universal Key for Fast Instrument Programming

  Most of the instruments in the Tecnologic range have the ability to accept the programming key via a 5 pin plug in the instrument housing. This allows very fast and completely repeatable programming at the touch of a button.

  The key has its own power supply so it can be used to power up an instrument straight from the box via its 5 pin connection. Alternatively the key will work without its power supply if the instrument is wired in situ to its supply.

  The Key has a series of dip switches located under a removable cover, these can be set in various different combinations. When the key is inserted into the instrument these combinations dictate if it will up load or down load a set of parameters to and from the instrument when the key’s button is pressed.

  The key is also used as a portal via its usb connection when working with the Tecnologic configuration software tools.

• UL approved