1/16th DIN panel size PID controllers with 2 outputs.

• Single or dual display
• Auto tuning PID or on/off control
• Up to 2 outputs, SSR or relay or both
• Integral timer as standard
• 4 segment programmer as standard (8 possible)
• Customizable menu structure
• T/C/RTD,PTC,NTC,mA, 0-1/0-10 v input
• Programming key

  Universal Key for Fast Instrument Programming

  Most of the instruments in the Tecnologic range have the ability to accept the programming key via a 5 pin plug in the instrument housing. This allows very fast and completely repeatable programming at the touch of a button.

  The key has its own power supply so it can be used to power up an instrument straight from the box via its 5 pin connection. Alternatively the key will work without its power supply if the instrument is wired in situ to its supply.

  The Key has a series of dip switches located under a removable cover, these can be set in various different combinations. When the key is inserted into the instrument these combinations dictate if it will up load or down load a set of parameters to and from the instrument when the key’s button is pressed.

  The key is also used as a portal via its usb connection when working with the Tecnologic configuration software tools.

The TLK43 offers up to 4 outputs in a 1/16th DIN package size.

• Universal inputs, selectable between T/C-RTD-NTC-PTC-Ma-0-1/0-10 v
• Up to 4 outputs, combination of relay, SSR, 4-20 mA and 0-1/0-10 volt
• Auto tuning PID or on/off control
• Re transmission of setpoint
• Value control
• Ramp, soak facility
• Soft start
• RS485 comms option
• Switch mode supply, 100-240 or 24 vac/dc
• UL approved

The TLK94 offers high accuracy PID control of temperature and other process varibles in a 18th DIN package size.

• Dual display as standard
• Up to 5 outputs, combinations of relay, SSR, 4-20 mA and 0-1/0-10 volt
• Heater break function
• RS 485 comms option
• Switch mode supply, 100-240 v or 24 v