K49T-LCORR-UK – PID CONTROLLER WITH TIMER 1/16 DIN, DUAL DISPLAY 24VAC/DC SUPPLY, THERMOCOUPLE OR PT100 INPUT, 1 X SSR, 2 X RELAY OUTPUT

£200.78

K49T-LCORR-UK

TECNOLOGIC PID CONTROLLER WITH TIMER. DUAL DISPLAY 24VAC/DC SUPPLY, THERMOCOUPLE OR PT100 INPUT, 1 X SSR, 2 X RELAY OUTPUT

Pre-programmed

We will contact you to discuss your application

SKU: K49T-LCORR-UK Category: Tag:

Description

Features

PID CONTROLLER WITH AUTOTUNE
UP TO 3 OUTPUTS
4 OR 8 SEGMENT PROGRAMMER
INDEPENDENT TIMER
MEMORY KEY / PC PROGRAMMING PORT
OPTIONAL:
POWER USAGE MONITOR
WORKED HOURS/DAY COUNTER

The K49 controller is a 48mm x 48mm dual display mini programmer controller.

The range is made up of lots of different variants that can have the following specification.

  • Panel mount controller 48×48 mm
  • 1 Configurable probe input
  • Up to 3 outputs
  • PID controller with:
    *  Independent timer (optional)
    *  8 segment programmer (optional)
    *  Wattmeter
    *  Counter for worked days and hours
    *  Compressor protection timer
  • TTL port
  • 2 display lines, 4 digit, h 7 mm, red and green colour

Process inputs:

1 temperature probe input

– Thermocouples: J, K, R, S,T
– PTC KTY81-121 (990 Ω @ 25 °C)
– NTC 103AT-2 (10KΩ @ 25 °C)
– RTD: Pt100
– Voltage (V): 0..1 V, 0/1…5 V , 0/2…10 V
– Voltage (mV): 0…50 mV, 0…60 mV, 12 …60 mV
– Current (mA): 0/4…20 mA
– Custom linearisation and IR probes (J.K type)
Overall accuracy: ± (0,5 % span ± 1 digit @25 °C); Tc S: ± (1 % span ± 1 digit @ 25 °C)

Keyboard

Mechanical: 4 multifunction keys

Process outputs

Up to 3 outputs:

OUT1
– RELAY SPST-NO, 8A
– SSR Drive
OUT2 
– RELAY SPST-NO, 8A
– SSR Drive
OUT3
– RELAY SPST-NO, 5A
– SSR Drive

Power supply:

– 24 VAC/VDC
– 100… 240 VAC (50/60 Hz)
Transmitter power supply: 10 VDC (±10%), 20 mA max.

Functions

– ON/OFF control with neutral zone
– PID single action or double action (Heat/Cool) with overshoot control
– Bumpless ramp to set point change
– Start-up delay
– Independent timer with 5 functioning modes (optional)
– Digital Setpoint retransmission (Note 1)
– Up to 4 memorized setpoints
– 8 segment programmer with events recovery, 2 events and guaranteed soak (optional)
– Wattmeter for calculating the instantaneous power and energy used
– Counter for days and hours worked
with programmable threshold for programmed maintenance
– Timer

Autotuning

– Adaptive Autotuning
– Oscillatory
– Fast

Alarms

– Up to 3 configurable alarms + loop break alarm

Communication and programming:

Interfaces

Communication on TTL port to: 
– Universal programming key
– Remote display

 

Enquire Today...

Technical
Documents