PROGRAMMING KEY-A015ES-E – KIT

Description

Programming key

The key is able to “dialogue” with:

• An instrument and to copy parameters from it to the key and vice versa
• A second key and to integrally copy its parameters
• A PC
• A PC and an instrument

A01 is able to recovery data from failed instruments too and permits unlimited copies of configuration, error free.

Power supply:

• 9V to 12 VDC (from external power supply)
• Power supply output to power the controllers for programming purposes

Functions:

• Selectable by 4 dip switches:
• Mode 1 Check up of the key firmware version
• Mode 2 Data copy, from instrument to key
• Mode 3 Data copy, from key to key
• Mode 4 Both configurations and data/programs copy, from key to instrument
• Mode 5 Configuration copy, from key to instrument
• Mode 6 Programs/data copy, from key to instrument
• Mode 7 USB – RS 485 converter
• Mode 8 USB – TTL converter without filtering(FF)(compatible with the past)
• Mode 9 USB – TTL with filtering (FF)
• Mode 10 Dialogue between key and PC with 3 initial (FF)(compatible with the past)
• Mode 11 Dialogue between key and PC without 3 initial (FF)

Communication and programming:

• Interfaces
• non-isolated TTL
• RS485 interface, not isolated to PC or controllers
• Mini-USB to PC

Installation:

• Case dimensions: 43 x 98 mm, depth 18 mm

Connections:

• Communication port connection

TTL:

• Male connector: JST S 5B-PH-KL
• Female connector: SAMTEC SQT-105-02-L-S

RS485:

• Phoenix MC 1,5/3-G-3.5 Mini-USB
• Power supply connector:Dc power jack 1.3mm

Connectable to:

• Instruments with TTL port